5 Takeaways That I Learned About

Basic Guide to Finding Hidden Valves and Piping

It is important that you know the details of your home like the back of your hand in case you are a homeowner. It is important to ensure that you are keen as well and are able to know where things like gas piping as well as valves are so that you are able to switch them off in case of an emergency. Some of the ways that you can be able to find out where the various shut off valves are located are briefly highlighted below.

If your home has natural gas then the shutoff valves will probably be located just before the gas meter outside the home. Such nubs are usually rectangular in shape and usually use a wrench and gas companies do not recommend touching them. There is however a side valve that is usually located where the gas pipe first enters or much further down the line.

If you have a gas pipe then the valve will most likely be located in the utility room and will be made from flexible copper. If you find such a piping in your home then you are sure that you have a really high pressure gas system. Such gas systems usually have the shutoff valve near the water heater or the furnace.

When it comes to water meters, you will likely have two shutoff valves one before and the other after the meter as shown on this homepage. Cold environments usually have the shut off points located in the house so that they do not freeze. For milder climates, you are most likely to find out that the valves are located in an underground lid or box next to exterior.

Take time to look at property reports if you are finding it hard to locate water shut off valve since they are usually indicated in property reports given in the last phase of the property purchase. It is important to look keenly at the report since it will show you where the valve is located. Pictures of the valves will also be drawn so that you are able to know what they look like.

Automatic valves for your sprinkler system may in most cases be located underground and are usually harder to find as you read more from this website. By using a metal detector, you are sure that you will be able to find such valves since they are usually made up of metals. Even though such valves may not be located exactly where the plans says using the plans is something that will definitely help you to find out where you need to start.

Citation: like it